Q ACOUSTICS CONCEPT 90

Q ACOUSTICS CONCEPT 90 Specification

Player Type
Passive Centre Channel Speaker

Material
Cabinet: Gelcore Construction, High Quality MDF

Channels
2.0 (Centre Channel)

Frequency (MHz)
Frequency Response: 55 Hz - 30 kHz

Control Device
External Amplifier

Power
80 W RMS (Recommended Amplifier Power)

Weight (kg)
14.5

Color
Black

About Q ACOUSTICS CONCEPT 90

Gelcore cabinet construction reduces higher frequency cabinet noise.
Isolation suspension base eradicates unwanted external and internal vibrations.
The driver assembly is mounted to the front aluminium baffle by pretensioned studs to give the correct acoustic seal, while dampen vibrations and minimise structural coupling of the assembly in main cabinet.
Ground-up mid/bass and tweeter driver design for increased power handling.
High-frequency driver is fully hermetically sealed and mechanically isolated (floating) from the front baffle to protect from internal resonances from the mid/bass driver. Crossover design is mounted on the isolation base, to minimise any microphonic pick up and away from electro-magnetic fields radiated by the drive units.

Advanced Gelcore Construction

This centre channel speaker utilizes a Dual Gelcore Cabinet, comprising high-quality MDF layered with damping gel, reducing cabinet resonance. The result is unparalleled transparency and clarity, making every movie or music listening session immersive. The precision engineering ensures crisp dialogue and rich sound effects, enhancing your home cinema experience.

Impressive Acoustic Performance

Equipped with two powerful 125mm mid/bass drivers and a 25mm hermetically sealed high-frequency tweeter, the Concept 90 delivers a detailed audio balance across the frequency spectrum. A crossover frequency of 2.1 kHz guarantees smooth transitions between drivers, while the wide frequency response (55 Hz - 30 kHz) captures subtle audio nuances.

FAQ's of Q ACOUSTICS CONCEPT 90:

Q: How do I position the Q ACOUSTICS CONCEPT 90 for optimal sound performance?

A: Place the Concept 90 at the center, just below your TV, ideally at ear level when seated. It's designed specifically for the centre channel position in a home cinema setup, ensuring clear dialogue and cohesive sound staging. Ensure there is adequate space around the speaker to minimize unwanted reflections.

Q: What amplifiers are suitable for powering the Concept 90 centre channel speaker?

A: The Concept 90 is a passive speaker requiring an external amplifier. For the best results, use an amplifier that delivers between 80W RMS and is compatible with a 6 Ohm impedance. This ensures sufficient power and maintains audio fidelity for medium to large rooms.

Q: When should I consider bi-wiring the Concept 90 speaker?

A: Bi-wiring can be beneficial if you are looking for enhanced audio clarity and separation. The Concept 90 supports bi-wiring, so if your amplifier and cables support this feature, you may experience more defined midrange and treble response by using separate cables for high and low frequencies.

Q: Where is the recommended placement for this centre channel speaker?

A: The Concept 90 should be placed centrally, typically below or above your screen, aligned with your main listening position. This placement ensures dialogue and central audio elements are anchored directly to the action on screen.

Q: What is the advantage of the Dual Gelcore Cabinet in the Concept 90?

A: The Dual Gelcore Cabinet uses layers of high-quality MDF and a special damping gel to reduce cabinet vibration and resonance. This construction technique delivers purer sound by minimizing distortion, resulting in clearer dialogue and audio detail.

Q: How do I care for and maintain the matte black finish?

A: To maintain the speaker's matte black finish, gently dust with a soft, dry cloth. Avoid using abrasive cleaners or polishing agents, as these may damage the surface. Regular cleaning will help keep the speaker looking elegant for years.

Tell us about your requirement